Reliable and cost effective IC package decapsulation is a fundamental requirement for IC FA analysis.

Nisene IC package decapsulators (starting with B&G model 250 through dcap d2i series) have been used in our labs over several years and have been proven to meet this requirement. Nisene Technology is a company that strives to please their customers by offering well-engineered and reliable products. They provide excellent sales, service, and engineering support and are a pleasure to do business with.

A big part of my job is getting integrated circuits open and keeping them functional for failure analysis. The JetEtch (and other models we’ve had) decapsulation system from Nisene Technology Group has been instrumental in accomplishing this goal for over 20 years. More recently, our goal of keeping functionality after the decapsulation process has become difficult due to Intel’s cutting-edge IC technologies. Thanks to Nisene Technology Group’s Applications Support division, the etch recipes they’ve developed makes this goal possible. Nisene Technology Group has a great team of people who are very resourceful, and they’re very easy to work with. To the entire Nisene team, I just want to say thank you. You guys are awesome. This is why you are the vendor of choice here at Intel.

North Shore Components recently purchased the JetEtch automated acid decapsulater, which significantly enhances our counterfeit component detection capabilities. We have found your system and your software to be easy-to-use and highly intuitive, and the service and support behind this product has been outstanding. We highly recommend the Nisene JetEtch automated acid decapsulater to anyone looking to prevent counterfeit components from entering the supply chain.

Right on! Thank you to everyone at Nisene. This is the way service should be. Other companies should take notice.

As failure analysis consultants for the electronics industry, our business depends on our ability to clearly identify the source of failures and determine their causes. Identifying the source often requires careful decapsulation of very delicate components with various wire bond and die materials. The JetEtch Pro CuProtect, with the copper protect feature, allows us to carefully and quickly decapsulate components with copper wire bonds without damaging the key bond features or the bond itself. It is a critical tool for us.

Nisene’s model for installation and training really works for us. Our trainer was an experienced user of the JetEtch Pro system we purchased and was able to provide valuable insight into proper system operation and maintenance. The organization of the Service and Operation Manual provided with the system allows users to quickly find the information they need to do their jobs and it is a great resource for OJT of new operators.

I just wanted to express my thanks to everyone at Nisene who helped process the 10 samples through de-cap and with the initial support analysis. We successfully completed bond integrity testing and sent the “thumbs up” to the program to go ahead and use the balance of the lot for production. This work had high visibility both here at Raytheon and also with our DoD customer and successful completion was welcomed by all involved.

Based on the equipment’s performance we are moving forward with the purchase of a JetEtch Pro CuProtect De-capsulator system. Although it will require “arm twist” in these tight budget times, the results of this work should help move things forward.

Rey & Nisene Team,

Thank you for your support throughout the past several days. Your service and attention to our needs alleviated some of the stress we were under by being line down.

Again… Thank you!

The JE500 JetEtch has been a great tool for my analytical lab. The tool has been very reliable for many years.

I think it has been ten years now, trouble-free. The etch variables that can be programmed has made it quite versatile.

Over the years I’ve dealt with companies that had terrific products and substandard service, and I’ve dealt with companies with substandard products and terrific service. I wanted to take this moment to tell you I have been extremely impressed with the quality of our JetEtch Pro, it’s simply a reliable workhorse. But what makes the situation even better is the high level of support and service provided by the entire staff. Abe and Rey in the service department are always available when questions arise, and when I sent our machine in for annual check-ups the service has been top notch.

Our company has owned two brands of de cap machines. The first one used a vacuum technology and was sold as being a safe and low cost system, all good except for the fact it was completely unreliable and never seemed to produce the same results twice. In the five months we owned it more time was spent “under the hood” than actually decapping parts. Five months was all I could stand before sending it back. We then bought the JetEtch Pro and haven’t looked back since. The machine continues to put out reliable and consistent etches day in and day out.

Thanks for a great product, and a great support team.

I am pleased to offer my highest recommendation of Nisene Technology Group. Nisene Technology Group has demonstrated professional and ethical business practices in all interactions with SMT Corporation during the past 8 years, exceeding our expectations in every transaction.

SMT Corporation’s first decapsulation system, JetEtch II, was purchased in 2008 and is still an active asset. SMT Corporation has since purchased two additional systems from Nisene, both JetEtch Pros. These three systems have outlasted two similar systems we purchased from a competitor; the two competitor systems lasted approximately one year with numerous service calls required during their active service.

Understanding that it takes highly qualified personnel to maintain good relationships, Nisene Technology Group employs exceptional staff that stays involved and accessible. Our three Nisene systems have each undergone service by Nisene’s service department. In addition to excellent communication with Nisene engineers, the turn-around time and cost was incredibly reasonable.

Nisene Technology Group is truly a company worth doing business with and SMT Corporation will
continue to work with them in the future.

If you need further information, please feel free to call.

Nisene’s JetEtch was added to our lab and ever since it has been the favorite method of chip decapsulation. The simple yet complete interface, quick start-up and processing time, and ease of break-down and maintenance are all reasons why we love our unit and prefer it over manual or mechanical methods of die exposure.

I know this was a lengthy process and it was hard to coordinate across the country through email but with the back and forth especially with Abe we finally got the machine back to full functionality. Thank you everyone for the support! Could have easily made me call in a tech but you walked me through it painlessly and it’s appreciated. Hopefully I can leave you alone for a little while. Thanks again!